Condensate Pumps

Why do we need condensate pumps? Condensate can build up if it is unable to drain away naturally. In this situation a condensate pump can be installed. The pumps usually consist of the actual pump block and a sensor unit which is either integrated into the pump block or delivered separately. LIMS HVAC supply a broad range of pumps from two leading brands; BLUE DIAMOND, and EDC – both of which are manufactured in the U.K. The BlueDiamond range from Charles Austen Pumps Ltd feature a revolutionary rotary diaphragm to eliminate the problems associated with most condensate pumps, such as noise and contamination. EDC’s range of pumps are specially designed for flexibility of positioning to maximise space and reduce isntallation hassles. Both brands have forgone the use of float switches in favour of electronic sensors to remove the required maintenance when the mechanical float switches become clogged and stuck.

  • Arctikblue

    $970.00 excl. GST
  • Blue Diamond C13-103

    $65.00 excl. GST
  • Blue Diamond C21-014

    MultiTank can prevent installation difficulties against centrifugal tank pumps
    which don’t have the ability to run dry. By incorporating either the MaxiBlue™ or
    MegaBlue™ the user can prevent regular service call-outs to peristaltic tank units that
    have split tubes or worn gearboxes.

    $115.00 excl. GST
  • Blue Diamond F10-011

    $35.00 excl. GST
  • Blue Diamond S12-002

    Hot & Cold Sensor Options

    hot-cold-sensor-options-box.jpg

    Position the hot thermistor sensor (red) in a suitable location at ambient air temperature. It is recommended that ceiling voids are avoided as these are usually at much higher temperatures. Place the cold thermistor sensor (blue) in the path of the air flow from the air conditioning unit.

    Price
    $0.00

    $79.00 excl. GST
  • Blue Diamond S12-004S

    DrainStik™ Install Options

    Insert the DrainStik™ sensor into the condensate tray/pipe and secure the hose in position. The DrainStik™ must be mounted vertically. Use the silicon hose provided. Remove pipe insulation down to the level of the end of the DrainStik™ or use the silicon hose provided.

    Price
    $0.00

    $79.00 excl. GST
  • Blue Diamond T18-016

    A sleek and discrete covering kit for mounting MICROBLUE beneath a unit

    $105.00 excl. GST
  • EDC Cougar

    Features

    Electronic Energy Control system (EECS) with alarm circuit
    Soft start with EECS
    All electrical components safely encapsulated against moisture ingress
    Submersible
    Amazingly quiet
    Powerful and compact
    Filter and non-return valves built in
    No mechanical floats to stick
    CE and UL marked

    Technical Specifications

    Power Supply: 110/230V, 50/60 Hz Auto sensing
    Power Consumption: 17W max., 0.25 when idle
    Alarm Relay: 5A, 30 VDC, 250VAC Break on fault
    Capacity: 12 litres/hour max. (3.6 US gal/h)
    Discharge head: >20m (65 ft) vertical,
    >100m (328 ft) horizontal
    1m max. (3.28 ft) suction
    Ambient temp: 0° C – 40° C (32 F to 104 F)
    Material: Flame retardant ABS UL94.5 VA
    Discharge tube: 6mm (1/4″) ID
    Dimensions: 160 x 43 x 34 mm

    Weighted Sound Power level: < 23dB
    Weighted Emission sound pressure level
    at a distance of 1m, calculated from the
    weighted sound power level: < 12dB

    $220.00 excl. GST
  • EDC Jaguar

    The Compact and powerful one piece easy to install pump

    Features
    Electronic Energy Control system (EECS) with alarm circuit
    Soft start with EECS
    No float to sticZ
    Thermal Protection
    Tiny reservoir sensing unit
    Low profile for ease of mounting
    Amazingly quiet
    High water alarm and cut-out switch
    Vertical or Horizontal mounting
    Fits all high wall-mount air conditioner
    CE and UL marked
    Technical Specifications
    Power Supply: 110/230V, 50/60 Hz Auto sensing
    Power Consumption: 17W max., 0.25 when idle
    Alarm Relay: 5A, 30 VDC, 250VAC Break on fault
    Capacity: 12 litres/hour max. (3.6 US gal/h)
    Discharge head: >20m (65 ft) vertical,
    >100m (328 ft) horizontal
    >1m max. (3.28 ft) suction
    Ambient temp: 0° C – 40° C (32 F to 104 F)
    Material: Flame retardant ABS UL94.5 VA
    Discharge tube: 6mm (1/4″€) ID
    Dimensions: 175 x 46 x 40 mm

    Weighted Sound Power level: < 29dB
    Weighted Emission sound pressure level
    at a distance of 1m, calculated from the
    weighted sound power level: < 18dB

    $220.00 excl. GST
  • EDC Limpet

    Features

    Electronic Energy Control system (EECS) with alarm circuit
    Soft start with EECS
    Quick, simple trouble free installation
    Aesthetic design that blends in naturally into its surroundings
    Thermal protection
    Amazingly quiet
    Built in non-return valves
    Fits all high-wall-mount air conditioners
    CE and UL marked

    Technical Specifications

    Power Supply: 110/230V, 50/60 Hz Auto sensing
    Power Consumption: 17W max., 0.25 when idle
    Alarm Relay: 5A, 30 VDC, 250VAC Break on fault
    Capacity: 12 litres/hour max. (3.6 US gal/h)
    Discharge head: >20m (65 ft) vertical,
    >100m (328 ft) horizontal
    >1m max. (3.28 ft) suction
    Ambient temp: 0° C – 40° C (32 F to 104 F)
    Material: Flame retardant ABS UL94.5 VA
    Discharge tube: 6mm (1/4″) ID
    Dimensions: 286 x 61 x 53 mm
    Made in UK
    Technology meets
    aesthetics The new
    LIMPET

    Weighted Sound Power level: < 32dB
    Weighted Emission sound pressure level
    at a distance of 1m, calculated from the
    weighted sound power level: < 21dB

    $265.00 excl. GST
  • EDC Panther

    Features

    Electronic Energy Control system (EECS) with alarm circuit
    Soft start with EECS
    No float to stick
    Thermal Protection
    Tiny reservoir – sensing unit
    Low profile for ease of mounting
    Amazingly quiet
    Fits all wall-mount splits
    CE and UL marked

    Technical Specifications

    Power Supply: 110/230V, 50/60 Hz Auto sensing
    Power Consumption: 17W max., 0.25 when idle
    Alarm Relay: 5A, 30 VDC, 250VAC Break on fault
    Capacity: 12 litres/hour max. (3.6 US gal/h)
    Discharge head: >20m (65 ft) vertical,
    >100m (328 ft) horizontal
    >1m max. (3.28 ft) suction
    Ambient temp: 0° C – 40° C (32 F to 104 F)
    Material: Flame retardant ABS UL94.5 VA
    Discharge tube: 6mm (1/4″€) ID
    Supply cable length: 1.5 metres
    Pump-sensor-tube: Length 1.5m, dia. 3.3 mm (1/8″)
    Dimensions pump: 135 x 46 x 32 mm
    Dimensions sensor: 45 x 36 mm dia.

    Weighted Sound Power level: < 27dB
    Weighted Emission sound pressure level
    at a distance of 1m, calculated from the
    weighted sound power level: < 16dB

    $215.00 excl. GST
  • Maxiblue

    Features:

    -Proven rotary diaphragm technology as used in Blue Diamond range
    -Flow rate up to 14 l/hr
    -Dry suction lift up to 8m
    -Self priming
    -Energy Efficient
    -Exceptionally quiet and no vibration
    -Powered by unique water sensors
    -Can be mounted in any orientation

    Now available with Temperature Sensor Option

    $260.00 excl. GST